Turtle Sense cable assembly instructions

From Nerds Without Borders
Revision as of 15:02, 11 August 2014 by Dave (talk | contribs) (Create page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Overview

We wire a short length of Cat5e cable to the Comm Board, and a 20 ft length of the same cable to the sensor board. We attach Molex connectors to the two cables. Materials used: Shielded direct burial cat5e cable Assembled Comm circuit board Assembled Smart Sensor circuit board Molex 9-pin plug Molex 9-pin receptacle Molex male pins Molex female pins 1/16" shrink tubing 1/2" shrink tubing

Instructions

1) Cut a 20" length

Retrieved from "http://nerdswithoutborders.net/index.php?title=Turtle_Sense_cable_assembly_instructions&oldid=253"